【Pre-Order】Honkai: Star Rail - Sunday Star Rail Live Ver. 1/8 Scale Figure Display Case

*Note: The display case only. The figure must be purchased separately.

INFO

• Standard Case:
  
• Material: Acrylic
  
• Inner Dimensions: approx. 222×165×340mm, Outer Dimensions: approx. 232×175×365mm
  
• Deluxe Case
  
• Material: Acrylic, LED
  
• Inner Dimensions: approx. 222×165×340mm, Outer Dimensions: approx. 232×175×390mm
  
• 1 light on top, 3 colors
  
• Accessories: 
  
• Deluxe Version – Acrylic knife, cotton gloves, 3mm edge sealing strip, silicon pad
  
• Standard Version – Acrylic knife, cotton gloves, 3mm edge sealing strip, silicon pad.
  
• Release Date: Oct 2026 (The product is expected to be delivered within 180 days after its official release)
  
• MiHOYO Official Product
  

Assembly Instructions

• Contents:
  
• Deluxe Version: Top panel / Side view of top panel / Back panel / Bottom light panel/Side panels ×2 / Front panel
  
• Standard Version: Top panel / Bottom panel / Back panel/Side panels ×2 / Front panel
  
• Steps:
  1. Please note that all acrylic panels have a protective film on both sides. Remove the film before assembly. If the surface appears matte or has visible scratches, it means the film is still attached.
  2. Assemble the side panels as shown in the diagram. Secure the lower edge of each side panel into the grooves of the bottom panel. Ensure all connected parts are tightly aligned.
  3.Place the top panel to complete the assembly.
  4. For the Deluxe Version, connect the power cable to the corresponding light panel port. The switch controls both the top and bottom lighting effects.
  5. Please note that for the light-up version, after assembly, the power port should face the back. A Type-C power cable is not included and must be prepared separately.
  6.Connect the power cable to the Type-C port on the back of the top light panel, and use the switch to control the top lighting color. Short press to switch between three light colors; long press for stepless brightness adjustment. Please use a USB-to-Type-C cable for power supply.