Zenless Zone Zero Badge Collection: Display and Care Tips

Quick Answer

To keep your Zenless Zone Zero badges and acrylic standees looking their best, display them away from direct sunlight and handle them by the edges to avoid scratches and fading.

Step-by-Step Display and Care Guide

1. Clean your badges and standees gently: Use a soft, dry microfiber cloth to wipe away dust. For stubborn spots, lightly dampen the cloth with water—never use alcohol or abrasive cleaners, which can damage the print or acrylic. Checkpoint: Always test on a small, hidden area first.
2. Display away from direct sunlight: UV rays can fade the colors on your badges and cause acrylic to yellow over time. Place your collection in a spot that gets indirect light, or use UV-protective display frames. Checkpoint: Rotate your displayed items occasionally to ensure even fading, if any.
3. Handle by the edges: When picking up badges or standees, hold them by the edges to avoid leaving fingerprints or scratching the surface. For standees, support the base when moving them. Checkpoint: If you notice smudges, clean them immediately to prevent buildup.
4. Store spares properly: Keep unused badges in their original packaging or a soft pouch, and standees in a flat, padded box. Avoid stacking heavy items on top of them. Checkpoint: Store in a cool, dry place to prevent moisture damage.
5. Use stable display stands: For acrylic standees, ensure the base is fully inserted and the surface is level. Consider using a display stand with a non-slip pad to prevent accidental falls. Checkpoint: Check stability periodically, especially if you have pets or kids.

Product Facts

• 【Pre-Order】Zenless Zone Zero - Standing Design Series Acrylic Standee Strategy Department: Acrylic standee, heights approximately 18.7cm (Velina) and 17.5cm (Norma), official MiHOYO product. The taller standee is more prone to tipping, so place it on a flat, stable surface away from edges.

  

• 【Pre-Order】Zenless Zone Zero – Resonance Frequency Series Where Clouds Embrance the Dawn Merch: Badges are tinplate, approximately 58mm in diameter, part of the Resonance Frequency series. Tinplate can scratch easily, so avoid stacking badges or rubbing them against hard surfaces.